GQD150K Large-opening frequency conversion tubular centrifuge
||GQD150K Large-opening frequency conversion tubular centrifuge
This machine is a new type of large-opening high-speed frequency conversion centrifuge developed by our company after GQ105 frequency conversion high-speed centrifuge.
The quick-wear parts of the large-opening centrifuge have long service life, the equipment is not easy to damage, the starting is stable, the service life is longer than that of the swing centrifuge, the occupied space is small, the operation is simple, and the safety factor of the operation is greatly improved. The machine body designed to open the door greatly reduces the labor intensity, and the rotating drum can be horizontally pulled out according to the site space and placed on a special stainless steel operation table to remove solid matters and realize quick and convenient cleaning.
Manual speed regulation and slow start during start-up play an excellent role in protecting bearings and rotating drums, reducing the frequency of replacing wearing parts, preventing the rotating drum from falling, reducing the number of dynamic balancing times of the rotating drum, and prolonging the service life of wearing parts.
When the machine is stopped and disassembled, the doors on both sides of the machine body can be fully opened, and the heavy rotating drum can be easily taken out for cleaning.
This machine is mainly used to separate various suspensions that are difficult to separate, and to separate flocs and tiny solid particles from the suspensions.
It is especially suitable for those with low concentration, large viscosity, fine solid particles and small solid-liquid specific gravity difference.
For example, animal and plant extract, fermentation liquor, various traditional Chinese medicine liquid, paste deslagging, malic acid, various oral liquids, and Asiatic moonseed rhizome clarification; Graphite clarification, deslagging of various paints, engine oil, diesel oil, coal tar, lubricating oil, etc., separation and concentration of various proteins and thalli, and purification of donkey-hide gelatin.
The separator consists of a machine body, a transmission system, a rotating drum, a liquid collecting system and a liquid inlet system.
The upper part of the rotating drum is linked with the flexible main shaft, and the bottom part is a damping sliding bearing.
When the equipment works, the rotating drum rotates at high speed around its own axis, forming a strong centrifugal force field. The material is injected from the liquid inlet nozzle of the bottom liquid inlet system, and the centrifugal force in the rotating drum forces the material liquid to flow upward along the inner wall of the rotating drum and delaminate due to the density difference of different composition of the material liquid.